2013-2015 Land Cruiser Prado · Service Manual Brake

43 ABS Control System Malfunction

Diagnostic trouble codes · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

DESCRIPTION

This DTC is output when the VSC system detects a malfunction in the ABS.
DTC Code
DTC Detection Condition
Trouble Area
43
A malfunction in the anti-lock brake system.
Anti-lock brake system

INSPECTION PROCEDURE

NOTICE:
When replacing the master cylinder solenoid, perform calibration (Click here).


1. CHECK ANTI-LOCK BRAKE SYSTEM
  1. Clear the DTCs (Click here).

  1. Turn the ignition switch off.

  1. Check if an ABS DTC is output (Click here).

    Result 
    Result
    Proceed to
    DTC (ABS DTC) is not output
    A
    DTC (ABS DTC) is output
    B



B
REPAIR CIRCUITS INDICATED BY OUTPUT DTCS (Click here)
A


2. CONFIRM DTC
  1. Clear the DTCs (Click here).

  1. Turn the ignition switch off.

  1. Check if the same DTC is output (Click here).

    Result 
    Result
    Proceed to
    DTC is not output
    A
    DTC is output (for LHD)
    B
    DTC is output (for RHD)
    C



B
REPLACE MASTER CYLINDER SOLENOID (Click here)

C
REPLACE MASTER CYLINDER SOLENOID (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)


← 43 ABS Control System Malfunction (Aug 2013 – Jul 2014)C0226 SFR Solenoid Circuit (+ 7 more codes) (Aug 2013 – Jul 2014) →