TERMINALS OF ECU
System information · Vehicles built from Aug 2013


| *a |
Component with harness connected (Stabilizer Control ECU) |
- |
- |
| Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
| G123-1 (SLAL) - Body ground |
LG - Body ground |
Stabilizer control solenoid valve output signal (for Upper Chamber) |
Ignition switch ON Vehicle stopped |
Below 1 V |
| G123-3 (SLAU) - Body ground |
P - Body ground |
Stabilizer control solenoid valve output signal (for Lower Chamber) |
Ignition switch ON Vehicle stopped |
Below 1 V |
| G123-6 (SGP1) - Body ground |
G - Body ground |
Pressure sensor ground |
Always |
Below 1 V |
| G123-15 (SBP1) - Body ground |
V - Body ground |
Power source (Pressure sensor) |
Ignition switch ON |
4.75 to 5.25 V |
| G123-17 (SOP1) - Body ground |
W - Body ground |
Pressure sensor input signal |
Ignition switch ON |
0.4 to 4.6 V |
| G123-22 (GND) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |
| G123-24 (IG) - Body ground |
B - Body ground |
Power source |
Ignition switch ON |
11 to 14 V |
| G123-28 (CANL) - G123-29 (CANH) |
W - V |
CAN communication line |
Ignition switch off |
54 to 69 Ω |