ON-VEHICLE INSPECTION
Inspection · Vehicles built from Aug 2013
| INSPECT WASHER NOZZLE SUB-ASSEMBLY |
With the engine running, check the position that the washer fluid hits the windshield.
- Standard:
- Washer fluid hits the windshield in the areas shown in the illustration.


Text in Illustration *1
Ceramic Line
-
-
*a
Upper Limit
*b
Standard
*c
Lower Limit
-
-


Washer Fluid Spray Area
-
-
- Standard Clearance:
Area
Specified Condition
Area
Specified Condition
A
78 mm (3.07 in.)
B
213 mm (8.39 in.)
C
158 mm (6.22 in.)
D
124 mm (4.88 in.)
- HINT:
- If the result is not as specified, replace the malfunctioning washer nozzle sub-assembly.
