2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

REMOVAL

Removal / installation · Vehicles built from Aug 2013


1. REMOVE WASHER NOZZLE SUB-ASSEMBLY

  1. E197819E01
    Using a screwdriver, detach the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape

    NOTICE:
    Be careful not to damage the windshield.

  1. E197820
    Disconnect the washer nozzle sub-assembly from the washer hose.

    NOTICE:
    Washer nozzles cannot be reused.

← ON-VEHICLE INSPECTION (from Aug 2013)ADJUSTMENT (from Aug 2013) →