INSTALLATION
Removal / installation · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| 1. INSTALL SUSPENSION CONTROL BRACKET LH |
Using SST, install the bracket with the nut.
- SST
- 09961-00950
- Torque:
- 15 N*m{ 153 kgf*cm , 11 ft.*lbf }
| 2. INSTALL ABSORBER CONTROL ACTUATOR LH |
Using a hexagon wrench (4 mm), install the absorber control actuator with the 2 hexagon socket head cap bolts.
- Torque:
- 7.8 N*m{ 80 kgf*cm , 69 in.*lbf }
- NOTICE:
- Replace the absorber control actuator with a new one if it is dropped.
Connect the connector, and then attach the 3 clamps.
- NOTICE:
- Securely connect the connector.
| 3. INSTALL FRONT WHEEL |
- Torque:
- 112 N*m{ 1142 kgf*cm , 83 ft.*lbf }
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
