INSTALLATION
Removal / installation · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| 1. INSTALL SKID CONTROL BUZZER ASSEMBLY |
Connect the connector.
- NOTICE:
- Securely connect the connector.
Attach the clamp to install the buzzer.
- NOTICE:
- Securely insert the clamp into the dash panel.
- If the buzzer is dropped, replace it.
- Securely insert the clamp into the dash panel.
| 2. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY |
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
