2013-2015 Land Cruiser Prado · Service Manual Brake

INSTALLATION

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. INSTALL SKID CONTROL BUZZER ASSEMBLY
  1. Connect the connector.

    NOTICE:
    Securely connect the connector.

  1. Attach the clamp to install the buzzer.

    NOTICE:
    1. Securely insert the clamp into the dash panel.
    2. If the buzzer is dropped, replace it.


2. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
(Click here)

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

← INSTALLATION (Aug 2013 – Jul 2014)COMPONENTS (from Aug 2013) →