2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT BACK DOOR WITH MOTOR LOCK ASSEMBLY

  1. B243068E01
    Apply battery voltage to the door lock motor and check the operation of the door lock motor.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → 4 (ACT+)
    Battery negative (-) → 1 (ACT-)
    Lock
    Battery positive (+) → 1 (ACT-)
    Battery negative (-) → 4 (ACT+)
    Unlock

    1. If the result is not as specified, replace the back door lock assembly.

  1. Measure the resistance of the door lock position switch.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    7 (S) - 8 (E)
    Lock
    10 kΩ or higher
    7 (S) - 8 (E)
    Unlock
    Below 1 Ω

    1. If the result is not as specified, replace the back door lock assembly.
      Text in Illustration 
      *a
      Unlock
      *b
      Lock

← REMOVAL (from Aug 2013)INSTALLATION (from Aug 2013) →