2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Aug 2013


CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Sliding Roof / DTC.

  5. Read the DTCs.


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Sliding Roof / DTC.

  5. Clear the DTCs.

← TERMINALS OF ECU (from Aug 2013)DATA LIST / ACTIVE TEST (from Aug 2013) →