2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built from Aug 2013


1. INSTALL BACK DOOR ELECTRICAL KEY SWITCH (w/ Back Door Tire Carrier)
  1. Attach the 2 guides to install the back door electrical key switch.

  1. Install the 2 screws.


2. INSTALL REAR LICENSE LIGHT COVER (w/ Back Door Tire Carrier)
  1. Install the rear license light cover with the 5 screws.


3. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY (w/ Back Door Tire Carrier)
(Click here)

4. INSTALL BACK DOOR ELECTRICAL KEY SWITCH (w/o Back Door Tire Carrier)
  1. Attach the 2 guides to install the back door electrical key switch.

  1. Install the 2 screws.

  1. Attach the clamp.


5. INSTALL NO. 1 BACK DOOR GARNISH RETAINER (w/o Back Door Tire Carrier)
  1. Install the No. 1 back door garnish retainer with the 3 screws.


6. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY (w/o Back Door Tire Carrier)
(Click here)
← INSPECTION (from Aug 2013)COMPONENTS (from Aug 2013) →