2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT BACK DOOR ELECTRICAL KEY SWITCH

  1. Check the operation of the switch.

    1. E283582E01
      Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      2 (L) - 3 (B)
      Lock switch not pushed
      10 kΩ or higher
      Lock switch pushed
      Below 1 Ω
      5 (UL) - 6 (E)
      Unlock switch not pushed
      10 kΩ or higher
      Unlock switch pushed
      Below 1 Ω

      If the result is not specified, replace the back door electrical key switch.
      Text in Illustration 
      *a
      Component without harness connected
      (Back Door Electrical Key Switch)

← REMOVAL (from Aug 2013)INSTALLATION (from Aug 2013) →