2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

INSTALLATION

Removal / installation · Vehicles built from Aug 2013


1. INSTALL REAR WASHER NOZZLE SUB-ASSEMBLY
  1. Attach the 2 claws to install the washer nozzle.

  1. Connect the hose.


2. INSTALL REAR SPOILER SUB-ASSEMBLY
  1. w/o Back Door Tire Carrier:
    Install the rear spoiler sub-assembly (Click here).

  1. w/ Back Door Tire Carrier:
    Install the rear spoiler sub-assembly (Click here).


3. INSTALL REAR SPOILER COVER RH
  1. Attach the 2 clips to install the rear spoiler cover.


4. INSTALL REAR NO. 1 SPOILER COVER (w/o Back Door Tire Carrier)
  1. Attach the 5 clips and fastening tape to install the rear No. 1 spoiler cover.


5. INSTALL BACK DOOR SIDE GARNISH LH (w/ Back Door Tire Carrier)
  1. Attach the 2 clips and claw to install the back door side garnish.


6. INSTALL BACK DOOR SIDE GARNISH RH (w/ Back Door Tire Carrier)
  1. Attach the 2 clips and claw to install the back door side garnish.


7. INSTALL BACK DOOR CENTER GARNISH (w/ Back Door Tire Carrier)
  1. Attach the 4 clips to install the back door center garnish.

← ADJUSTMENT (from Aug 2013)COMPONENTS (from Aug 2013) →