2013-2015 Land Cruiser Prado · Service Manual Suspension

C2176/76 Receiver Error

Diagnostic trouble codes · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

DESCRIPTION

The signals are transmitted to the tire pressure warning ECU and receiver in the vehicle as radio waves.
DTC No.
DTC Detection Condition
Trouble Area
C2176/76
Malfunction in the tire pressure warning ECU and receiver internal circuit
Tire pressure warning ECU and receiver

INSPECTION PROCEDURE

NOTICE:
  1. When replacing the tire pressure warning ECU and receiver, read the transmitter IDs stored in the old ECU using the GTS and write them down before removal.
  2. It is necessary to perform initialization (Click here) after registration (Click here) of the transmitter IDs into the tire pressure warning ECU and receiver if the ECU has been replaced.


1. CHECK DTC OUTPUT (C2176/76)
  1. Clear the DTCs (Click here).

  1. Turn the ignition switch off.

  1. Turn the ignition switch ON.

  1. Check for DTCs (Click here).

    OK:
    DTC C2176/76 is not output.



NG
REPLACE TIRE PRESSURE WARNING ECU AND RECEIVER (Click here)
OK

CHECK FOR INTERMITTENT PROBLEMS (Click here)


← C2176/76 Receiver Error (Aug 2013 – Jul 2014)C2177/77 Initialization not Completed (Aug 2013 – Jul 2014) →