2013-2015 Land Cruiser Prado · Service Manual Suspension

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


CHECK DTC (USING GTS)
  1. Turn the ignition switch off.

  2. Connect the GTS to the DLC3.

  3. Turn the ignition switch ON.

  4. Turn the GTS on.

  5. Enter the following menus: Chassis / Tire Pressure Monitor / Trouble Codes.

  6. Read the DTCs.


CHECK DTC (USING SST CHECK WIRE)
C213287E06
  1. Turn the ignition switch off.

  2. Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

    SST
    09843-18040  

  3. Turn the ignition switch ON.

  4. Read and record any DTCs from the tire pressure warning light on the combination meter. Refer to the illustration for examples of a normal system code and codes 13 and 33.

    HINT:
    1. If the tire pressure warning light does not indicate any DTCs or the normal system code, inspect the tire pressure warning light circuit or TC and CG terminal circuit.
      Trouble Area
      See page
      Tire pressure warning light circuit
      Click here
      TC and CG terminal circuit
      Click here
    2. If 2 or more malfunctions are indicated at the same time, the lowest numbered DTC is displayed first.

    Text in Illustration 
    *1
    DLC3
    *2
    Tire Pressure Warning Light
    *a
    Normal System Code
    *b
    ON
    *c
    OFF
    *d
    0.25 sec.
    *e
    Code 13 and 33
    *f
    0.5 sec.
    *g
    2.5 sec.
    *h
    1.5 sec.
    *i
    4.5 sec.
    *j
    Repeat

  5. Refer to the Diagnostic Trouble Code Chart (Click here) for DTC information.

  6. After completing the check, turn the ignition switch off and remove SST from the DLC3.


CLEAR DTC

HINT:
After repairing the malfunctions, clear the DTCs.

  1. Turn the ignition switch off.

  2. Connect the GTS to the DLC3.

  3. Turn the ignition switch ON.

  4. Turn the GTS on.

  5. Enter the following menus: Chassis / Tire Pressure Monitor / Trouble Codes.

  6. Clear DTCs following the prompts on the GTS screen.

    HINT:
    Refer to the GTS operator's manual for further details.

← DTC CHECK / CLEAR (Aug 2013 – Jul 2014)DATA LIST / ACTIVE TEST (Aug 2013 – Jul 2014) →