2013-2015 Land Cruiser Prado · Service Manual Steering

C1541 Vehicle Speed Signal

Diagnostic trouble codes · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

DESCRIPTION

The power steering ECU receives vehicle speed signals from the skid control ECU via CAN communication. The power steering ECU provides appropriate assisting force in accordance with the vehicle speed signal.
DTC Code
DTC Detection Condition
Trouble Area
C1541
An abnormal vehicle speed signal is received.
  1. Speed sensor circuit
  2. Brake control system
  3. CAN communication system
  4. Power steering ECU assembly

INSPECTION PROCEDURE


1. CHECK OTHER DTC OUTPUT (CAN COMMUNICATION SYSTEM)
  1. Check if DTC U0129 is output (Click here).

    Result 
    Result
    Proceed to
    DTC U0129 is not output.
    A
    DTC U0129 is output.
    B

    HINT:
    DTC U0129 indicates a CAN communication malfunction in the power steering system.



B
REPAIR CIRCUIT INDICATED BY OUTPUT CODE (Click here)
A


2. CHECK OTHER DTC OUTPUT (BRAKE CONTROL SYSTEM)
  1. Using the GTS, check for DTCs and confirm that there are no problems in the brake control system (Click here for Hydraulic Brake Booster, Click here for Vacuum Brake Booster).

    Result 
    Result
    Proceed to
    DTC is not output.
    A
    DTC is output.
    for Hydraulic Brake Booster
    B
    for Vacuum Brake Booster
    C



B
GO TO VEHICLE STABILITY CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) (Click here)

C
GO TO VEHICLE STABILITY CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) (Click here)
A

REPLACE POWER STEERING ECU ASSEMBLY (Click here)


← C1541 Vehicle Speed Signal (Aug 2013 – Jul 2014)C1544 High Engine Revolution Signal (Aug 2013 – Jul 2014) →