2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

REMOVAL

Removal / installation · Vehicles built from Aug 2013


1. REMOVE V-BANK COVER

  1. A229925E01
    Raise the front of the V-bank cover to detach the 2 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.
    Text in Illustration 
    *1
    Pin
    *2
    Hook


2. REMOVE NO. 1 AIR CLEANER HOSE

  1. A221455
    Disconnect the ventilation hose and vacuum hose.

  1. Detach the wire harness clamp.

  1. Remove the bolt and loosen the 2 hose clamps.

  1. Remove the No. 1 air cleaner hose.


3. REMOVE VVT SENSOR (for Intake Side of Bank 1)

  1. A221424
    Disconnect the sensor connector.

  1. Remove the bolt and sensor.


4. REMOVE VVT SENSOR (for Exhaust Side of Bank 1)

  1. A221425
    Disconnect the sensor connector.

  1. Remove the bolt and sensor.


5. REMOVE VVT SENSOR (for Intake Side of Bank 2)

  1. A221426
    Disconnect the sensor connector.

  1. Remove the bolt and sensor.


6. REMOVE VVT SENSOR (for Exhaust Side of Bank 2)

  1. A221427
    Disconnect the sensor connector.

  1. Remove the bolt and sensor.

← COMPONENTS (from Aug 2013)INSTALLATION (from Aug 2013) →