2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Aug 2013


CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON and turn the tester on.

  3. Enter the following menus: Body Electrical / Trouble Codes.

  4. Check for DTCs.


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON and turn the tester on.

  3. Enter the following menus: Body Electrical / Trouble Code.

  4. Clear the DTCs.

← TERMINALS OF ECU (from Aug 2013)DATA LIST / ACTIVE TEST (from Aug 2013) →