Attach the television display assembly to the 2 guides on the front side of the bracket by moving it in the direction of the arrow in the illustration, and then attach 2 new clips to temporarily install the television display assembly.
Install the television display assembly with the 4 bolts in the order shown in the illustration.
Torque:
8.5 N*m{
87 kgf*cm
, 75 in.*lbf
}
Connect the connector.
2.
INSTALL TELEVISION BASE
Attach the 7 claws and 4 clips to install the television base.
3.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).