2013-2015 Land Cruiser Prado · Service Manual Suspension

INSTALLATION

Removal / installation · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. INSTALL SUSPENSION CONTROL ECU
  1. Install the suspension control ECU with the 2 bolts.

    Torque:
    8.5 N*m{ 87 kgf*cm , 75 in.*lbf }

    NOTICE:
    1. Replace the suspension control ECU with a new one if it is dropped.
    2. Make sure the bracket rotation stopper touches the installation position.

  1. Connect the 3 connectors.

    NOTICE:
    Securely connect the connectors.


2. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for LHD)
(Click here)

3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)
(Click here)

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


5. PERFORM REGISTRATION
(Click here)
← REMOVAL (from Aug 2014)INSTALLATION (from Aug 2014) →