2013-2015 Land Cruiser Prado · Service Manual Suspension

INSTALLATION

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. INSTALL FRONT ACCELERATION SENSOR

  1. C212876
    Install the front acceleration sensor with the bolt as shown in the illustration.

    Torque:
    8.5 N*m{ 87 kgf*cm , 75 in.*lbf }

    NOTICE:
    Replace the front acceleration sensor with a new one if it is dropped.

  1. Connect the connector to the front acceleration sensor.

    NOTICE:
    Securely connect the connector.


2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)
(Click here)

3. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for RHD)
(Click here)

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

← INSTALLATION (Aug 2013 – Jul 2014)COMPONENTS (from Aug 2013) →