2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Aug 2013


CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Entry&Start / DTC.

  5. Check for DTCs.


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Entry&Start / DTC.

  5. Clear the DTCs.

← TERMINALS OF ECU (from Aug 2014)DATA LIST / ACTIVE TEST (from Aug 2013) →