2013-2015 Land Cruiser Prado · Service Manual Suspension

DISPOSAL

Removal / installation · Vehicles built from Aug 2013


1. DISPOSE OF REAR SHOCK ABSORBER ASSEMBLY LH
  1. Fully extend the rear shock absorber rod.

  1. D028629E05
    Using a drill, make a hole in the cylinder between A and B in the illustration to discharge the gas inside.

    CAUTION:
    Be careful when drilling because shards of metal may fly about. Always use the proper safety equipment.

    NOTICE:
    The gas is colorless, odorless and harmless.

← INSTALLATION (from Aug 2013)COMPONENTS (from Aug 2013) →