Part Name
|
Function
|
Stabilizer Control ECU
|
- Closes the stabilizer control valves according to input signals from the sensor to cut the fluid flow to the accumulators.
- Turns on the KDSS indicator light in the combination meter to inform the driver when an abnormality is detected in the KDSS. When this happens, a DTC is stored.
|
Stabilizer Control with Accumulator Housing Assembly
|
Accumulator Pressure Sensor
|
Detects the pressure in the hydraulic circuit.
|
Stabilizer Control Solenoid Valve
|
Cuts the fluid flow to the accumulator.
|
Speed Sensor (Skid Control ECU)
|
Detects the wheel speed of each wheel.
|
Steering Angle Sensor
|
Detects the steering wheel's steering angle and amount of movement, and then sends signals to the stabilizer control ECU.
|
Yaw Rate and Acceleration Sensor
|
Detects vehicle's the yaw rate and acceleration and sends signals to the stabilizer control ECU.
|