HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- *: Use the intelligent tester.
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.CUSTOMER PROBLEM ANALYSIS |
| |||||
| 3.INSPECT BATTERY VOLTAGE |
- Standard voltage:
- 11 to 14 V
| |||||
| 4.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM* |
Using the intelligent tester, inspect the CAN communication function to make sure there are no malfunctions in the communication system (for LHD: Click here, for RHD: Click here).
Result Result
Proceed to
CAN DTC is not output
A
CAN DTC is output
B
|
|||||
| |||||
| 5.CHECK AND CLEAR DTC* |
Check for DTCs (Click here).
| |||||
| 6.PROBLEM SYMPTOM CONFIRMATION |
| Result |
Proceed to |
| Symptom does not occur |
A |
| Symptom Occurs |
B |
|
|||||
| |||||
| 7.SYMPTOM SIMULATION |
| |||||
| 8.CHECK DTC* |
Check for DTCs (Click here).
Result Result
Proceed to
DTC not output
A
DTC output
B
|
|||||
| |||||
| 9.PROBLEM SYMPTOMS TABLE |
Refer to the Problem Symptoms Table (Click here).
| |||||
| 10.DTC CHART |
Refer to the Diagnostic Trouble Code Chart (Click here).
| |||||
| 11.CIRCUIT INSPECTION |
| |||||
| 12.IDENTIFICATION OF PROBLEM |
| |||||
| 13.REPAIR OR REPLACE |
| |||||
| 14.CONFIRMATION TEST |
| |||||