C1AE4 Front Right Sensor Malfunction
Diagnostic trouble codes · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
DESCRIPTION
The No. 1 ultrasonic sensor (front corner sensor RH) is installed on the front bumper. The ECU detects obstacles based on signals received from the No. 1 ultrasonic sensor (front corner sensor RH). If the No. 1 ultrasonic sensor (front corner sensor RH) has an open circuit or other malfunction, it will not function normally.| DTC Code |
DTC Detection Condition |
Trouble Area |
| C1AE4 |
A malfunction of the No. 1 ultrasonic sensor (front corner sensor RH). |
|
INSPECTION PROCEDURE
- NOTICE:
- If the DTC is output after repairs, turn the engine switch on (IG) and turn the TOYOTA parking assist-sensor system on. Then clear the DTC (Click here).
| 1. CHECK FOR DTC |
Check for DTCs (Click here).
Result Result
Proceed to
No DTC is output
A
Only DTC C1AE4 is output
B
DTC C1AE4 and C1AEC are output
C
|
|
||||
|
|
||||
| A | ||
| ||
| 2. REPLACE NO. 1 ULTRASONIC SENSOR (FRONT CORNER SENSOR RH) |
Replace the No. 1 ultrasonic sensor (front corner sensor RH) with a normally functioning sensor (Click here).
- HINT:
- All of the sensors are interchangeable. To confirm whether a sensor is functioning normally, switch it with a known good sensor from the other end of the vehicle.
| NEXT | |
| 3. CHECK FOR DTC |
Clear the DTCs (Click here).
Check for DTCs (Click here).
Result Result
Proceed to
No DTC is output
A
DTC C1AE4 is output (for LHD)
B
DTC C1AE4 is output (for RHD)
C
|
|
||||
|
|
||||
| A | ||
| ||
