INSTALLATION
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| 1.
INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER |
 |
- Connect the connector.
Insert the 2 guides and install the tire pressure warning ECU and receiver with the bolt.
-
Torque:
- 8.3 N*m{
85 kgf*cm
, 73 in.*lbf
}
| 2.
INSTALL ROOF HEADLINING ASSEMBLY |
 |
(Click here)
| 3.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 4.
REGISTRATION OF TRANSMITTER ID |
 |
(Click here)
| 5.
INSPECT TIRE PRESSURE WARNING SYSTEM |
 |
(Click here)
| 6.
PERFORM INITIALIZATION |
 |
(Click here)