INSTALLATION
Removal / installation · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| 1. INSTALL TELEPHONE MICROPHONE ASSEMBLY |
Attach the 2 claws to install the microphone.

Install the circuit board.

Connect the connector.

Install the cover with the 7 screws.
| 2. INSTALL THEFT WARNING RADAR SENSOR |
Attach the wire harness to the clamp, return the sensor to its original position and install it with the 2 screws.
Connect the connector.

Attach the harness of the theft warning radar sensor with 4 new pieces of tape.
| 3. INSTALL MAP LIGHT ASSEMBLY |
Connect the connector.
Attach the 4 clips to install the map light.
