2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

REMOVAL

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. REMOVE MAP LIGHT ASSEMBLY

  1. E198057
    Detach the 4 clips.

  1. Disconnect the connector and remove the map light.


2. REMOVE THEFT WARNING RADAR SENSOR

  1. B238875
    Remove all the tape and the 2 screws.

  1. Detach the clamp and disconnect the central part of the theft warning radar sensor.

    HINT:
    The theft warning radar sensor cannot be completely removed.

  1. Disconnect the connector.


3. REMOVE TELEPHONE MICROPHONE ASSEMBLY

  1. B238876
    Using a thin-bladed screwdriver, disconnect the connector.

    HINT:
    Tape the screwdriver tip before use.

  1. Remove the 7 screws and cover.

  1. B238877
    Remove the circuit board.

  1. B241323
    Remove the bezel.

  1. B246498E01
    Using a thin-bladed screwdriver, detach the 2 claws and remove the microphone.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective tape

← REMOVAL (Aug 2013 – Jul 2014)INSTALLATION (Aug 2013 – Jul 2014) →