REMOVAL
Removal / installation · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| 1.
REMOVE MAP LIGHT ASSEMBLY
|
 |
- Detach the 4 clips.
Disconnect the connector and remove the map light.
| 2.
REMOVE THEFT WARNING RADAR SENSOR |
 |
- Remove all the tape and the 2 screws.
Detach the clamp and disconnect the central part of the theft warning radar sensor.
- HINT:
- The theft warning radar sensor cannot be completely removed.
Disconnect the connector.
| 3.
REMOVE TELEPHONE MICROPHONE ASSEMBLY |
 |
- Using a thin-bladed screwdriver, disconnect the connector.
- HINT:
- Tape the screwdriver tip before use.
Remove the 7 screws and cover.
- Remove the circuit board.
- Remove the bezel.
- Using a thin-bladed screwdriver, detach the 2 claws and remove the microphone.
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration
*1
|
Protective tape
|