2013-2015 Land Cruiser Prado · Service Manual Suspension

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT NO. 2 HEIGHT CONTROL VALVE SUB-ASSEMBLY

  1. C214512E03
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 (LH+) - 2 (E)
    15 to 25°C (59 to 77°F)
    10 to 14 Ω
    3 (RH+) - 2 (E)

    Text in Illustration 
    *a
    Component without harness connected
    (No. 2 Height Control Valve)

  1. Check the operating sound of the height control valve when battery voltage is applied to the terminals.

    OK:
    Measurement Condition
    Specified Condition
    1 (LH+) - 2 (E)
    Sound of No. 2 height control valve operating can be heard
    3 (RH+) - 2 (E)

    If the result is not as specified, replace the No. 2 height control valve sub-assembly.

← REMOVAL (from Aug 2014)INSTALLATION (Aug 2013 – Jul 2014) →