INSTALLATION
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| 1. INSTALL STARTER ASSEMBLY |
Install the starter assembly with the bolt and 2 nuts.
- Torque:
- 68 N*m{ 693 kgf*cm , 50 ft.*lbf }
Connect the starter wire with the nut.
- Torque:
- 21 N*m{ 215 kgf*cm , 16 ft.*lbf }
Connect the starter connector.
Install the terminal cap.
| 2. INSTALL REAR ENGINE UNDER COVER ASSEMBLY |
Install the rear engine under cover with the 4 bolts.
- Torque:
- 29 N*m{ 296 kgf*cm , 21 ft.*lbf }
| 3. INSTALL FRONT NO. 1 FENDER APRON TO FRAME SEAL LH |
Install the frame seal with the 5 clips.
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
