2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

INSTALLATION

Removal / installation · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. INSTALL FUEL TEMPERATURE SENSOR
  1. Apply a small amount of light oil to the O-ring of a new fuel temperature sensor.

  1. A330480E01
    Using SST, install the fuel temperature sensor.
    SST
    09922-10010  

    Torque:
    Specified tightening torque:
    22 N*m{ 224 kgf*cm , 16 ft.*lbf }

    Text in Illustration 
    *a
    Torque Wrench Fulcrum Length

    HINT:
    1. Calculate the torque wrench reading when changing the fulcrum length of the torque wrench (Click here).
    2. When using SST (fulcrum length of 137 mm (5.4 in.)) + torque wrench (fulcrum length of 300 mm (11.8 in.)): 15 N*m (154 kgf*cm 11 ft.*lbf)


2. INSTALL FUEL SUPPLY PUMP ASSEMBLY
  1. w/ DPF: (Click here)
  2. w/o DPF: (Click here)
← INSPECTION (from Aug 2013)INSTALLATION (from Aug 2014) →