INSTALLATION
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| 1. INSTALL FUEL TEMPERATURE SENSOR |
Apply a small amount of light oil to the O-ring of a new fuel temperature sensor.
Using SST, install the fuel temperature sensor.

- SST
- 09922-10010
- Torque:
- Specified tightening torque:
- 22 N*m{ 224 kgf*cm , 16 ft.*lbf }
Text in Illustration *a
Torque Wrench Fulcrum Length
- HINT:
- Calculate the torque wrench reading when changing the fulcrum length of the torque wrench (Click here).
- When using SST (fulcrum length of 137 mm (5.4 in.)) + torque wrench (fulcrum length of 300 mm (11.8 in.)): 15 N*m (154 kgf*cm 11 ft.*lbf)
- Calculate the torque wrench reading when changing the fulcrum length of the torque wrench (Click here).
| 2. INSTALL FUEL SUPPLY PUMP ASSEMBLY |
- w/ DPF: (Click here)
- w/o DPF: (Click here)
