U0100 Lost Communication with ECM
Diagnostic trouble codes · Vehicles built Aug 2013 – Jul 2014
Also covers:
- U0101 Lost Communication With TCM
- U0142 Lost Communication with Body Control Module "B"
- U0155 Lost Communication with Instrument Panel Cluster Control Module (Combination Meter)
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
DESCRIPTION
These DTCs are stored when the clearance warning ECU cannot receive and recognize certain signals via the CAN communication system.| DTC Code |
DTC Detection Condition |
Trouble Area |
| U0100 |
A problem with the engine information signal from the ECM |
CAN communication system |
| U0101 |
A problem with the shift position information signal from the power management control ECU |
CAN communication system |
| U0142 |
A problem with the vehicle information signal from the main body ECU (multiplex network body ECU) |
CAN communication system |
| U0155 |
A problem with the vehicle speed information signal from the combination meter assembly |
CAN communication system |
- HINT:
- When 2 or more DTCs starting with "U" are output simultaneously, inspect the connectors and wire harness of each ECU.
INSPECTION PROCEDURE
| 1. CHECK FOR DTC |
Clear the DTCs (Click here).
Check for DTCs (Click here).
Result Result
Proceed to
DTC (CAN communication system DTC) is output (for LHD with Entry and Start System)
A
DTC (CAN communication system DTC) is output (for LHD without Entry and Start System)
B
DTC (CAN communication system DTC) is output (for RHD with Entry and Start System)
C
DTC (CAN communication system DTC) is output (for RHD without Entry and Start System)
D
No DTC is output
E
|
|
||||
|
|
||||
|
|
||||
|
|
||||
| A | ||
| ||
