Using moulding remover A, detach the 3 claws and remove the rear door inside handle bezel as shown in the illustration.
2.
REMOVE ASSIST GRIP COVER LH
Using moulding remover A, detach the 8 claws and remove the assist grip cover.
3.
REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH
Remove the 3 screws.
Using a clip remover, detach the 9 clips.
Pull out the rear door trim board sub-assembly in the direction indicated by the arrow in the illustration.
Raise the rear door trim board sub-assembly to detach the 4 claws and remove the rear door trim board sub-assembly together with the rear door inner glass weatherstrip.
Disconnect the rear door lock remote control cable assembly and rear door inside locking cable assembly as shown in the illustration.
Disconnect each connector.
Text in Illustration
*A
for 14 Speakers
*B
for 9 Speakers
Using a screwdriver, detach the claw and remove the clamp.
4.
REMOVE REAR DOOR INNER GLASS WEATHERSTRIP LH
Using a screwdriver, detach the 3 claws and remove the rear door inner glass weatherstrip from the rear door trim board sub-assembly as shown in the illustration.
5.
REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY
Detach the 2 claws and remove the rear power window regulator switch assembly.