Television Display does not Turn ON
Circuit diagnosis · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
INSPECTION PROCEDURE
| 1. CLEAN INFRARED RAY RECEIVING PORTION |
 |
- Clean the infrared ray receiving portion on the television display assembly.
Check whether the same malfunction occurs.
- OK:
- The function returns to normal.
|
NG |
 |
|
|
|
| OK |
|
 |
|
|
| 2. CHECK TELEVISION SWITCH AND VOLUME ASSEMBLY (DRY-CELL BATTERY) |
 |
Check that the dry-cell battery of the television switch and volume assembly is not depleted.
- OK:
- Battery is not depleted.
|
NG |
 |
|
| REPLACE TELEVISION SWITCH AND VOLUME ASSEMBLY (DRY-CELL BATTERY) |
|
|
| OK |
|
 |
|
| 3. CHECK TELEVISION SWITCH AND VOLUME ASSEMBLY |
 |
Temporarily replace the television switch and volume assembly with a new or known good one.
Check that the television display assembly turns on.
- OK:
- The television display assembly turns on.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| END (TELEVISION SWITCH AND VOLUME ASSEMBLY WAS DEFECTIVE) |
|