2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

Television Display does not Turn ON

Circuit diagnosis · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

INSPECTION PROCEDURE


1. CLEAN INFRARED RAY RECEIVING PORTION

  1. E284352
    Clean the infrared ray receiving portion on the television display assembly.

  1. Check whether the same malfunction occurs.

    OK:
    The function returns to normal.



NG
Go to step 2
OK

END

2. CHECK TELEVISION SWITCH AND VOLUME ASSEMBLY (DRY-CELL BATTERY)
  1. Check that the dry-cell battery of the television switch and volume assembly is not depleted.

    OK:
    Battery is not depleted.



NG
REPLACE TELEVISION SWITCH AND VOLUME ASSEMBLY (DRY-CELL BATTERY)
OK


3. CHECK TELEVISION SWITCH AND VOLUME ASSEMBLY
  1. Temporarily replace the television switch and volume assembly with a new or known good one.

  1. Check that the television display assembly turns on.

    OK:
    The television display assembly turns on.



NG
REPLACE TELEVISION DISPLAY ASSEMBLY (Click here)
OK

END (TELEVISION SWITCH AND VOLUME ASSEMBLY WAS DEFECTIVE)


← A Remote Control System does not Operate (from Aug 2014)Television Display does not Turn ON (from Aug 2014) →