2013-2015 Land Cruiser Prado · Service Manual Brake

DISASSEMBLY

Removal / installation · Vehicles built from Aug 2013


1. REMOVE BRAKE FLUID INFORMATION LABEL

2. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY
  1. Remove the brake master cylinder reservoir filler cap assembly from the brake master cylinder reservoir assembly.


3. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER
  1. Remove the brake master cylinder reservoir strainer from the brake master cylinder reservoir assembly.


4. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY
  1. Using a pin punch and hammer, remove the pin from the brake master cylinder reservoir.


5. REMOVE MASTER CYLINDER RESERVOIR GROMMET
  1. Remove the 2 master cylinder reservoir grommets from the brake master cylinder reservoir assembly.

← REMOVAL (from Aug 2014)INSPECTION (from Aug 2013) →