2013-2015 Land Cruiser Prado · Service Manual Brake

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT BRAKE BOOSTER ASSEMBLY

  1. Airtightness check

    1. C132722E04
      Start the engine and stop it after 1 or 2 minutes. Slowly depress the brake pedal several times.
      If the pedal can be depressed to the floor the first time, but on the 2nd and 3rd times cannot be depressed as far, the booster is airtight.
      Text in Illustration 
      *a
      CORRECT
      *b
      INCORRECT

    2. Depress the brake pedal while the engine is running and stop the engine with the brake pedal depressed.
      If there is no change in the pedal reserve distance while holding the pedal for 30 seconds, the booster is airtight.

  1. Operation check

    1. C128542
      Depress the brake pedal several times with the ignition switch off and check that there is no change in the pedal reserve distance when the pedal is depressed.

    2. C128543
      Depress and hold down the pedal and start the engine.
      If the pedal goes down slightly, operation is normal.

← COMPONENTS (from Aug 2013)REMOVAL (Aug 2013 – Jul 2014) →