2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

B2452 Height Control Sensor Data Out of Range When Initializing

Diagnostic trouble codes · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

DESCRIPTION

The headlight swivel ECU stores this DTC if the sensor value received from the height control sensor is out of range when performing initialization of the headlight swivel ECU; for example, the vehicle is not level or is being jacked up.
DTC Code
DTC Detection Condition
Trouble Area
B2452
The sensor value received from the height control sensor is out of range when performing initialization.
  1. Vehicle condition when initializing
  2. Headlight swivel ECU assembly

INSPECTION PROCEDURE


1. PERFORM INITIALIZATION
  1. Perform initialization of the headlight swivel ECU (Click here).

    HINT:
    1. Before initializing, make sure that the vehicle condition is proper for initialization.
    2. Be sure to perform the initialization as instructed.


NEXT


2. CHECK FOR DTC
  1. Check for DTCs (Click here).

    Result 
    Result
    Proceed to
    DTC B2452 is not output
    A
    DTC B2452 is output
    B

    HINT:
    If the headlight swivel ECU stores DTC B2452 even though the ECU has been initialized as instructed, there may be a malfunction in the headlight swivel ECU.



B
REPLACE HEADLIGHT SWIVEL ECU ASSEMBLY (Click here)
A

END


← B2450 Initialization has not been Performed (from Aug 2014)B2452 Height Control Sensor Data Out of Range When Initializing (from Aug 2014) →