B2452 Height Control Sensor Data Out of Range When Initializing
Diagnostic trouble codes · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
DESCRIPTION
The headlight swivel ECU stores this DTC if the sensor value received from the height control sensor is out of range when performing initialization of the headlight swivel ECU; for example, the vehicle is not level or is being jacked up.| DTC Code |
DTC Detection Condition |
Trouble Area |
| B2452 |
The sensor value received from the height control sensor is out of range when performing initialization. |
|
INSPECTION PROCEDURE
| 1. PERFORM INITIALIZATION |
Perform initialization of the headlight swivel ECU (Click here).
- HINT:
- Before initializing, make sure that the vehicle condition is proper for initialization.
- Be sure to perform the initialization as instructed.
- Before initializing, make sure that the vehicle condition is proper for initialization.
| NEXT | |
| 2. CHECK FOR DTC |
Check for DTCs (Click here).
Result Result
Proceed to
DTC B2452 is not output
A
DTC B2452 is output
B
- HINT:
- If the headlight swivel ECU stores DTC B2452 even though the ECU has been initialized as instructed, there may be a malfunction in the headlight swivel ECU.
|
|
||||
| A | ||
| ||
