2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

INSTALLATION

Removal / installation · Vehicles built from Aug 2013


1. INSTALL ENGINE SWITCH
  1. Attach the 2 claws to install the engine switch.

  1. Connect the connector to the engine switch.


2. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o CRAWL)
  1. Attach the 3 clips and guide to install the lower center instrument cluster finish panel.

  1. Install the 2 bolts <E>.


3. INSTALL COMBINATION SWITCH (w/ CRAWL)
(Click here)

4. INSTALL FRONT CONSOLE UPPER PANEL GARNISH
  1. w/o Seat Heater System:

    1. Connect the connector.

    2. Attach the 5 clips to install the front console upper panel garnish.

  1. w/o CRAWL:

    1. Connect each connector.

    2. Attach the 5 clips to install the front console upper panel garnish.

  1. w/ CRAWL:

    1. Attach the 5 clips to install the front console upper panel garnish.


5. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
  1. Connect the connector.

  1. Attach the 4 clips to install the integration control and panel assembly.


6. INSTALL INSTRUMENT PANEL FINISH PANEL END RH
  1. Attach the 4 clips to install the instrument panel finish panel end RH.


7. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION

HINT:
Use the same procedure described for the No. 2 instrument panel finish panel cushion.


8. INSTALL INSTRUMENT PANEL FINISH PANEL END LH
  1. Attach the 4 clips to install the instrument panel finish panel end LH.


9. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION
  1. Attach the 5 clips to install the No. 2 instrument panel finish panel cushion.

← INSPECTION (from Aug 2013)COMPONENTS (from Aug 2013) →