2013-2015 Land Cruiser Prado · Service Manual Brake

INSTALLATION

Removal / installation · Vehicles built from Aug 2013


1. INSTALL CENTER CLUSTER MODULE SWITCH (MULTI-TERRAIN SELECT SWITCH)
  1. Install the center cluster module panel to the center cluster module switch with the 4 screws.


2. INSTALL COMBINATION SWITCH
  1. Connect the connector.

  1. Attach the 3 clamps to install the center cluster module switch.

  1. Install the 2 bolts to the instrument panel safety pad sub-assembly.


3. INSTALL FRONT CONSOLE UPPER PANEL GARNISH
  1. w/o Seat Heater System:

    1. Connect the connector.

    2. Attach the 5 clips to install the front console upper panel garnish.

  1. w/o CRAWL:

    1. Connect each connector.

    2. Attach the 5 clips to install the front console upper panel garnish.

  1. w/ CRAWL:

    1. Attach the 5 clips to install the front console upper panel garnish.


4. INSTALL INSTRUMENT PANEL FINISH PANEL END LH
  1. Attach the 4 clips to install the instrument panel finish panel end LH.


5. INSTALL INSTRUMENT PANEL FINISH PANEL END RH
  1. Attach the 4 clips to install the instrument panel finish panel end RH.

← INSPECTION (from Aug 2013)PRECAUTION (from Aug 2013) →