2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

INSTALLATION

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
  1. Attach the claw to install the windshield wiper switch assembly.

  1. w/ Rain Sensor:
    Connect the connector.

  1. w/o Rain Sensor:
    Connect the 2 connectors.


2. INSTALL UPPER STEERING COLUMN COVER
  1. Attach the 4 clips to install the upper steering column cover to the instrument cluster finish panel.


3. INSTALL LOWER STEERING COLUMN COVER
  1. Attach the 2 claws to install the lower steering cover.

  1. for Power Tilt and Power Telescopic:
    Install the screw.

  1. Turn the steering wheel to the right and left as necessary to install the 2 screws.


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

← INSTALLATION (Aug 2013 – Jul 2014)COMPONENTS (from Aug 2013) →