2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT REAR HEADER SPEAKER ASSEMBLY

  1. E180661E16
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    4 Ω

    If the result is not as specified, replace the rear header speaker assembly.
    Text in Illustration 
    *a
    Component without harness connected
    (Rear Header Speaker Assembly)


INSPECT NO. 1 SPEAKER ASSEMBLY WITH BOX

  1. E144969E64
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    2 (WF1+) - 4 (WF1-)
    Always
    2 Ω

    If the result is not as specified, replace the No. 1 speaker assembly with box.
    Text in Illustration 
    *a
    Component without harness connected
    (No. 1 Speaker Assembly with Box)

← REMOVAL (from Aug 2014)INSTALLATION (Aug 2013 – Jul 2014) →