DTC CHECK / CLEAR
Troubleshooting · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| CHECK DTC |
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Chassis / Parking Assist Monitor System / DTC.
Check the details of the DTCs (Click here).
- HINT:
- The parking assist ECU may store the DTCs of the following system. If DTCs other than those specified in Diagnostic Trouble Code Chart of the parking assist monitor system are output, refer to Diagnostic Trouble Code Chart for the applicable system.
System
Proceed to
Side Monitor System
Click here
Wide View Front Monitor System
Click here
| CLEAR DTC |
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Chassis / Parking Assist Monitor System / DTC.
According to the display on the GTS, select the trouble code data display with the clear button.