2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

DTC CHECK / CLEAR

Troubleshooting · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


CHECK DTC
  1. Connect the GTS to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the GTS on.

  4. Enter the following menus: Chassis / Parking Assist Monitor System / Trouble Codes.

  5. Check the details of the DTCs (Click here).

    HINT:
    Parking assist ECU may output the DTCs of the following system. If DTCs other than those specified in Diagnostic Trouble Code Chart of the side monitor system are output, refer to Diagnostic Trouble Code Chart for the applicable system.
    System
    Proceed to
    Parking Assist Monitor System
    Click here
    Wide View Front Monitor System
    Click here


CLEAR DTC
  1. Connect the GTS to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the GTS on.

  4. Operate the GTS to clear the codes. Enter the following menus: Chassis / Parking Assist Monitor System / Trouble Codes.

  5. According to the display on the GTS, select the trouble code data display with the clear button.

← DIAGNOSIS SYSTEM (from Aug 2014)DTC CHECK / CLEAR (from Aug 2014) →