REASSEMBLY
Removal / installation · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| 1.
INSTALL LOWER NO. 1 RADIATOR GRILLE |
 |
Attach the 18 claws to install the lower No. 1 radiator grille.
| 2.
INSTALL NO. 2 ENGINE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System) |
 |
Attach the 7 clamps to install the No. 2 engine room wire.
| 3.
INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)
|
 |
- HINT:
- Use the same procedure to install the No. 1 ultrasonic sensor retainer on the other side.
Align the keyhole and protrusion as shown in the illustration.
Install the No. 1 ultrasonic sensor retainer to the front bumper cover.
- NOTICE:
- Do not damage the bumper cover with the protrusion when installing the retainer.
Text in Illustration
*1
|
Keyhole
|
| 4.
INSTALL NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)
|
 |
- HINT:
- Use the same procedure to install the No. 1 ultrasonic sensor on the other side.
Attach the 2 claws to install the No. 1 ultrasonic sensor.
Connect the connector.
| 5.
INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)
|
 |
- Attach the 2 claws to install the headlight washer actuator sub-assembly LH as shown in the illustration.
- Push up the headlight cleaner clamp B to install it.
Text in Illustration
*1
|
Headlight Cleaner Clamp B
|
- Install the headlight washer actuator sub-assembly LH with the headlight cleaner clamp as shown in the illustration.
Text in Illustration
*1
|
Headlight Cleaner Clamp
|
*2
|
Headlight Washer Actuator Sub-assembly LH
|
*3
|
Headlight Cleaner Clamp B
|
 
|
Push Here
|
| 6.
INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System) |
 |
- HINT:
- Use the same procedure described for the LH side.
| 7.
INSTALL NO. 1 HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)
|
 |
Attach the 5 clamps to install the No. 1 headlight cleaner hose to the front bumper cover.
Connect the No. 1 headlight cleaner hose to the headlight washer actuator sub-assembly.
| 8.
INSTALL TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH (w/ Headlight Cleaner System)
|
 |
Connect a new washer nozzle sub-assembly to the washer hose.
Attach the 2 claws to install the washer nozzle sub-assembly.
| 9.
INSTALL TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH (w/ Headlight Cleaner System) |
 |
- HINT:
- Use the same procedure described for the LH side.
| 10.
INSTALL FOG LIGHT COVER LH (w/ Fog Light) |
 |
Attach the 3 clips to install the fog light cover LH.
Install the screw.
| 11.
INSTALL FOG LIGHT COVER RH (w/ Fog Light) |
 |
- HINT:
- Use the same procedure described for the LH side.
| 12.
INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)
|
 |
Attach the 2 guides to install the fog light assembly LH.
Install the 2 screws.
Connect the connector.
| 13.
INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light) |
 |
- HINT:
- Use the same procedure described for the LH side.
| 14.
INSTALL FRONT BUMPER REINFORCEMENT STOPPER RH (w/ Fog Light) |
 |
Attach the 2 claws to install the front bumper reinforcement stopper RH.
| 15.
INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light) |
 |
Attach the 3 clips to install the front bumper hole cover LH.
Install the screw.
| 16.
INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light) |
 |
- HINT:
- Use the same procedure described for the LH side.
| 17.
INSTALL FRONT SPOILER LH (w/ Front Spoiler) |
 |
Install the front spoiler LH with the 2 front spoiler No. 1 retainers.
| 18.
INSTALL FRONT SPOILER RH (w/ Front Spoiler) |
 |
- HINT:
- Use the same procedure described for the LH side.
| 19.
INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (w/ Bracket) |
 |
Install the front bumper extension mounting bracket with the 2 screws.