2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

INSTALLATION

Removal / installation · Vehicles built from Aug 2013

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL ROCKER PANEL MOULDING LH (for 5 Door)
  1. Attach the 7 clips to install the rocker panel moulding.

  1. Install the 2 screws.

  1. Install the 7 rocker panel moulding retainers and screw.


2. INSTALL ROCKER PANEL MOULDING LH (for 3 Door)
  1. Attach the 8 clips to install the rocker panel moulding.

  1. Install the screw.

  1. Install the 6 rocker panel moulding retainers and screw.


3. INSTALL NO. 2 ROCKER PANEL MOULDING PROTECTOR
  1. Install No. 2 rocker panel moulding protector with the 2 screws.


4. INSTALL SIDE STEP ASSEMBLY LH (w/ Side Step)
  1. Install the side step (Click here).


5. INSTALL FRONT FENDER MUDGUARD LH
  1. Install the front fender mudguard with the 4 screws and 2 clips.

← REMOVAL (from Aug 2013)COMPONENTS (from Aug 2013) →