REMOVAL
Removal / installation · Vehicles built from Aug 2013
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- Use the same procedure for the RH and LH sides.
| 1. REMOVE FRONT FENDER MUDGUARD LH |
![]() ![]() |
Remove the 2 clips and 4 screws.
Remove the front fender mudguard.
| 2. REMOVE SIDE STEP ASSEMBLY LH (w/ Side Step) |
Remove the side step (Click here).
| 3. REMOVE NO. 2 ROCKER PANEL MOULDING PROTECTOR |
![]() ![]() |
Remove the 2 screws and No. 2 rocker panel moulding protector.
| 4. REMOVE ROCKER PANEL MOULDING LH (for 5 Door) |
Remove the 7 rocker panel moulding retainers and screw.


Put protective tape around the rocker panel moulding.
Remove the 2 screws.
Detach the 7 clips and remove the rocker panel moulding.


Text in Illustration *1
Protective Tape
-
-
| 5. REMOVE ROCKER PANEL MOULDING LH (for 3 Door) |
Remove the 6 rocker panel moulding retainers and screw.


Put protective tape around the rocker panel moulding.
Remove the screw.
Detach the 8 clips and remove the rocker panel moulding.


Text in Illustration *1
Protective Tape
-
-


